English
I-motor ye-stepper echanekileyo kakhulu enobubanzi obuyi-20mm ene-lead screw brass slider, i-1.2KG thrust, Umfanekiso obonisiweyo
  • I-motor ye-stepper echanekileyo ngobubanzi obuyi-20mm ene-lead screw brass slider eyi-1.2KG
  • I-motor ye-stepper echanekileyo ngobubanzi obuyi-20mm ene-lead screw brass slider eyi-1.2KG
  • I-motor ye-stepper echanekileyo ngobubanzi obuyi-20mm ene-lead screw brass slider eyi-1.2KG
  • I-motor ye-stepper echanekileyo ngobubanzi obuyi-20mm ene-lead screw brass slider eyi-1.2KG
  • I-motor ye-stepper echanekileyo ngobubanzi obuyi-20mm ene-lead screw brass slider eyi-1.2KG

I-motor ye-stepper echanekileyo ngobubanzi obuyi-20mm ene-lead screw brass slider eyi-1.2KG

Inkcazo emfutshane:

Inombolo yoMzekelo  I-SM20-35L-T
Uhlobo lwemoto  Imoto ye-stepper ethe tye ene-slider
I-voltage yokuqhuba  12V DC
I-engile yenyathelo  18°/INYATHELO
Inani lezigaba  Izigaba ezi-2 (i-bipolar)
Uhlobo lwesikrufu se-Lead  M3*0.5P
Ukumelana nekhoyili  20Ω±10% ohm/isigaba (20)℃）
Ubungakanani obuncinci be-odolo  Iyunithi e-1

Iinkcukacha zeMveliso

Iithegi zeMveliso

Inkcazo

Le yimoto ye-magnet stepper esisigxina enobubanzi obuyi-20mm ene-brass slider.
Isilayidi sebrass senziwe nge-CNC kwaye sinomgca ophindwe kabini ukubonelela ngenkxaso enamandla.
I-thrust yesilayida yi-1~1.2 KG(10~12N), kwaye i-thrust inxulumene ne-pitch ye-lead screw yemoto, i-drive voltage kunye ne-driving frequency.
Kule moto kusetyenziswa isikrufu se-M3*0.5mm pitch lead.
Xa i-voltage yokuqhuba iphezulu, kwaye i-frequency yokuqhuba iphantsi, i-torque yesilayida iya kuba nkulu.
Umgama wokuhamba ngemoto (umgama wokuhamba) yi-35 mm, sikwanayo ne-21 mm kunye ne-63 mm yokukhetha, ukuba abathengi bafuna ubungakanani obufutshane.
Isixhumi semoto yi-P1.25mm pitch, isixhumi esineephini ezi-4. Singayiguqula sibe lolunye uhlobo lwesixhumi ukuba abathengi bafuna ezinye izixhumi zepitch.

Iiparameters

Inombolo yoMzekelo I-SM20-35L-T
I-voltage yokuqhuba 12V DC
Ukumelana nekhoyili 20Ω±10%/isigaba
Inani lesigaba Izigaba ezi-2 (i-bipolar)
I-engile yenyathelo 18°/inyathelo
Ukutyhala 1~1.2 KG
Istroke 35mm
Isikrufu se-Lead M3*0.5P
Ubude benyathelo 0.025mm
Indlela yokuvuselela Uvuselelo lwesigaba esi-2-2
Imo yokuqhuba Ukuqhuba nge-bipolar
Iklasi yokukhusela ubushushu Iklasi e yeekhoyili
Uluhlu lobushushu bokusebenza -0~+55℃

Umzekelo weReferensi yohlobo oluSetyenzisiweyo

I-CVXV 2

Umzobo woYilo

I-XCV 1

Malunga neemoto ze-stepper ezithe ngqo

Imoto ye-linear stepper ine-screw ye-lead ukuguqula intshukumo yokujikeleza ibe yintshukumo ye-linear. Iimoto ze-stepper ezine-screw ye-lead zinokuthathwa njengemoto ye-linear stepper.
I-slider linear stepper motor ine-bracket, i-slider, kunye nee-support rods zongezwa, ngokusekelwe kuyilo lwe-external drive linear motor. Ngenxa yokuba ii-support rods zibonelela ngendlela yokulwa nokujikeleza kwe-slider, i-slider inokwenza i-linear movement kuphela.
I-lead yesikrufu se-lead ilingana ne-pitch yayo, kwaye xa i-motor ijikeleza i-turn slider enye ishukumisa i-pitch enye yomgama.
Umzekelo, ukuba i-engile yenyathelo lemoto yi-18°, oko kuthetha ukuba kuthatha amanyathelo angama-20 ukujikeleza ijika elinye. Ukuba isikrufu se-lead yi-M3*0.5P, i-pitch yi-0.5mm, isilayida sihamba nge-0.5mm kujikelezo ngalunye.
Ubude benyathelo lemoto yi-0.5/20=0.025mm. Oku kuthetha ukuba xa imoto ithatha inyathelo elinye, intshukumo ethe tye yeskrubhu/isilayida yi-0.025mm. Kwiimoto ezinobubanzi obufanayo kunye ne-torque, ubude benyathelo obude obunayo, isantya esikhawulezayo somgca siya kuba naso, kodwa i-thrust encinci iya kuba naso ngexesha elinye.

Uhlobo lwemoto ye-stepper ethe tyaba

I-DFG 3

Isicelo

Isantya semoto simiselwa ngokuphindaphindiweyo kokuqhuba, kwaye ayinanto yakwenza nomthwalo (ngaphandle kokuba ilahlekelwa ngamanyathelo).
Ngenxa yokulawula isantya esiphezulu seemoto ze-stepper, xa uqhuba unyathela ngendlela echanekileyo ungafikelela kwindawo efanelekileyo kunye nolawulo lwesantya. Ngenxa yesi sizathu, iimoto ze-stepper zezona moto zikhethwayo kwiindlela ezininzi zokulawula intshukumo ngendlela echanekileyo.
Kwiimoto ze-stepper ezithe tyaba, zisetyenziswa kakhulu kwezi:
Isixhobo sezonyango
Izixhobo zekhamera
Inkqubo yolawulo lwevalvu
Isixhobo sovavanyo
Ukuprinta kwe-3D
Umatshini we-CNC
kwaye nangokunjalo

I-ASD 4

Inkonzo yokwenza ngokwezifiso

Uyilo lweMoto lungahlengahlengiswa ngokusekelwe kwiimfuno zomthengi kuquka:
Ububanzi bemoto: sinemoto enobubanzi obuyi-6mm, 8mm, 10mm, 15mm kunye ne-20 mm
Ukumelana nekhoyili/ i-voltage elinganisiweyo: ukumelana nekhoyili kunokulungiswa, kwaye xa kuxhathiswa kakhulu, i-voltage elinganisiweyo yemoto iphezulu.
Uyilo lwezibiyeli/ ubude bezikrufu zentsimbi: ukuba umthengi ufuna isibiyeli sibe side/sifutshane, ngoyilo olukhethekileyo olufana nemingxunya yokufaka, sinokulungiseka.
I-PCB + iintambo + isixhumi: Uyilo lwe-PCB, ubude bentambo kunye nephiko lesixhumi zonke ziyalungiseka, zingatshintshwa zibe yi-FPC ukuba abathengi bafuna.

Ixesha leNkokheli kunye nolwazi lokuPakisha

Ixesha lokukhokela iisampulu:
Iimoto eziqhelekileyo ezikhoyo: zingadlulanga iintsuku ezi-3
Iimoto eziqhelekileyo azikho esitokhweni: zingadlulanga iintsuku ezili-15
Iimveliso ezenziwe ngokwezifiso: Malunga neentsuku ezingama-25 ~ 30 (ngokusekwe kubunzima bokwenza ngokwezifiso)

Ixesha lokukhokela ekwakheni isikhunta esitsha: ngokubanzi malunga neentsuku ezingama-45

Ixesha lokukhokela kwimveliso yobuninzi: ngokusekelwe kubungakanani beodolo

Ukupakisha:
Iisampulu zipakishwe kwisponji yefoam kunye nebhokisi yephepha, zithunyelwa nge-express
Imveliso enkulu, iimoto zipakishwa kwiibhokisi ezirhabaxa ezinefilimu ecacileyo ngaphandle. (zithunyelwa ngenqwelo moya)
Ukuba ithunyelwa ngolwandle, imveliso iya kupakishwa kwiipalethi

I-ASD 5

uhlobo lokuqhuba ngenqanawe

Kwiisampuli kunye nokuthunyelwa ngenqwelo moya, sisebenzisa iFedex/TNT/UPS/DHL.(Iintsuku ezi-5 ~ ezili-12 zenkonzo esheshayo)
Kwimpahla yokuthutha ngenqanawa, sisebenzisa iarhente yethu yokuthumela, kwaye siyithumela ukusuka kwizibuko laseShanghai.(Iintsuku ezingama-45~70 zokuthunyelwa ngenqanawa)

FAQ

1.Ngaba ungumenzi?
Ewe, singabavelisi, kwaye sivelisa ikakhulu iimoto ze-stepper.

2. Iphi indawo yakho yefektri? Singatyelela ifektri yakho?
Umzi-mveliso wethu useChangzhou, eJiangsu. Ewe, wamkelekile ukuba usityelele.

3.Ngaba ungabonelela ngeesampuli zasimahla?
Hayi, asiboneleli ngeesampuli zasimahla. Abathengi abayi kuziphatha ngendlela efanelekileyo iisampuli zasimahla.

4. Ngubani ohlawulela iindleko zokuthumela? Ndingayisebenzisa iakhawunti yam yokuthumela?
Abathengi bahlawula iindleko zokuthumela. Siza kukucaphula iindleko zokuthumela.
Ukuba ucinga ukuba unendlela yokuthumela engabizi kakhulu/elula ngakumbi, singasebenzisa iakhawunti yakho yokuthumela.

5. Uyintoni i-MOQ yakho? Ndinga-odola i-motor enye?
Asinayo i-MOQ, kwaye unga-odola isampuli enye kuphela.
Kodwa sicebisa ukuba u-odole kancinci, ukuba injini yonakele ngexesha lovavanyo lwakho, kwaye unokuba ne-backup.

6. Siphuhlisa iprojekthi entsha, ngaba nibonelela ngenkonzo yokwenza ngokwezifiso? Ngaba singasayina isivumelwano se-NDA?
Sinamava angaphezu kweminyaka engama-20 kwishishini leemoto ezithwala abantu abaninzi.
Siphuhlise iiprojekthi ezininzi, singabonelela ngokwenziwa ngokwezifiso ngokupheleleyo ukusuka kumzobo woyilo ukuya kwimveliso.
Siqinisekile ukuba asinakukunika iingcebiso/iingcebiso ezimbalwa malunga neprojekthi yakho ye-stepper motor.
Ukuba ukhathazekile ngemicimbi eyimfihlo, ewe, singasayina isivumelwano se-NDA.

7. Ngaba niyabathengisa abaqhubi? Ngaba niyabavelisa?
Ewe, siyabathengisa abaqhubi. Bafaneleke kuphela kuvavanyo lwesampulu yexeshana, abafanelekanga ukuvelisa ngobuninzi.
Asivelisi abaqhubi, sivelisa ii-stepper motors kuphela

  • Ngaphambili:
  • Okulandelayo:

    • Thumela umyalezo wakho kuthi:

    Bhala umyalezo wakho apha uze uwuthumele kuthi.

    Iindidi zemveliso

    Thumela umyalezo wakho kuthi:

    Bhala umyalezo wakho apha uze uwuthumele kuthi.
    Cofa u-enter ukuze uphendle okanye ucofe u-ESC ukuze uvale