Injini ye-NEMA11 hybrid stepper enobukhulu obungama-28mm, i-angle yesinyathelo se-1.8 degrees, i-shaft D, ubude obahlukeneyo Umfanekiso obonisiweyo

Injini ye-NEMA11 hybrid stepper enobukhulu obungama-28mm, i-angle yesinyathelo se-1.8 degrees D shaft, ukuphakama okwahlukeneyo

Inkcazo emfutshane:

Inombolo yoMzekelo:	28HS32
Uhlobo lwemoto:	imoto ye-hybrid stepper
I-engile yenyathelo:	1.8°/inyathelo
Ubungakanani benjini:	28mm (NEMA 11)
Inani lezigaba:	Izigaba ezi-2 (i-bipolar)
Ubude benjini:	32~51mm
Ubungakanani obuncinci be-odolo:	Iyunithi e-1

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Inkcazo

Le yimoto ye-hybrid stepper enobukhulu obuyi-28mm (NEMA 11) ene-D output shaft.
I-engile yenyathelo iqhelekile yi-1.8°/inyathelo.
Sinobude obahlukileyo onokukhetha kubo, ukusuka kwi-32mm ukuya kwi-51mm.
Ngokuphakama okukhulu, iimoto zine-torque ephezulu, kwaye ixabiso liphezulu.
Kuxhomekeke kwi-torque efunekayo kumthengi kunye nendawo, ukuze kugqitywe ukuba loluphi ubude obufanelekileyo.

Ngokubanzi, iimoto esizivelisa kakhulu ziimoto ze-bipolar (iintambo ezi-4), sikwanazo neemoto ze-unipolar ezikhoyo, ukuba abathengi bafuna ukuqhuba le moto eneengcingo ezi-6 (iinqanaba ezi-4).

Iiparameters

I-Angle yeNyathelo (°)	Ubude benjini (mm)	Ukubamba i-torque *(gcm)**	Okwangoku /isigaba (Isigaba/isigaba)	Ukuchasa (Ω/isigaba)	Ukungenisa (mH/isigaba)	Inani le ii-lead	I-inertia yokujikeleza *(gcm**²)	Ubunzima (IKG)
1.8	32	430	0.95	2.8	0.8	6	9	0.11
1.8	32	600	0.67	5.6	3.4	4	9	0.11
1.8	45	750	0.95	3.4	1.2	6	12	0.14
1.8	45	950	0.67	6.8	4.9	4	12	0.14
1.8	51	900	0.95	4.6	1.8	6	18	0.2
1.8	51	1200	0.67	9.2	7.2	4	18	0.2

Umzobo woYilo

Malunga ne-hybrid stepper motor

Iimoto ze-hybrid stepper zikwimo yesikwere ngokubanzi, kwaye imoto ye-stepper inokubonwa ngemo yayo yangaphandle eyahlukileyo.
Injini ye-hybrid stepper ine-engile ye-1.8°step （200 step/revolution） okanye i-engile ye-0.9°step (amanyathelo angama-400/revolution). I-engile ye-step imiselwa linani lamazinyo kwi-rotor's laminations.

Kukho iindlela ezahlukeneyo zokubiza i-hybrid stepper motor:
Ngeyunithi yeMetric (iyunithi: mm) okanye ngeyunithi yoMkhosi (iyunithi: intshi)
Umzekelo, i-motor engama-42mm = i-motor ye-stepper eyi-1.7 intshi.
Ngoko ke i-motor engama-42mm ingabizwa ngokuba yi-motor ye-NEMA 17.

Inkcazo yegama le-hybrid stepper motor:
Umzekelo, i-42HS40 stepper motor:
I-42 ithetha ukuba ubukhulu bayo yi-42mm, ngoko ke yimoto ye-NEMA17.
I-HS ithetha imoto yeHybrid Stepper.
40 ithetha ukuba ukuphakama yi-motor eyi-40mm.
Sinobude obahlukeneyo abathengi abanokukhetha kubo, xa ubude buphezulu, injini iya kuba ne-torque ephezulu, ubunzima obukhulu, kunye nexabiso eliphezulu.
Nantsi indlela eyakhiwe ngayo ngaphakathi kwenjini ye-hybrid stepper eqhelekileyo.

Ulwakhiwo olusisiseko lweemoto ze-NEMA stepper

Ukusetyenziswa kwemoto yeHybrid stepper

Ngenxa yokuba iimoto ze-hybrid stepper zinamandla aphezulu (amanyathelo angama-200 okanye angama-400 ngokujikeleza ngakunye), zisetyenziswa kakhulu kwizicelo ezifuna ukuchaneka okuphezulu, ezinje:
Ukuprinta kwe-3D
Ulawulo lwemizi-mveliso (i-CNC, umatshini wokugaya ozenzekelayo, oomatshini belaphu)
Izixhobo zekhompyutha
Umatshini wokupakisha
Nezinye iinkqubo ezizenzekelayo ezifuna ulawulo oluchanekileyo.

Amanqaku malunga neemoto ze-hybrid stepper

Abathengi kufuneka balandele umgaqo othi “khetha iimoto ze-stepper kuqala, uze ukhethe umqhubi ngokusekelwe kwimoto ye-stepper ekhoyo”
Kungcono ungasebenzisi imo yokuqhuba enenyathelo elipheleleyo ukuqhuba imotha yokunyathela exutyiweyo, kwaye ukungcangcazela kukhulu xa uqhuba ngenyathelo elipheleleyo.
Imoto ye-hybrid stepper ifanelekile ngakumbi kwiziganeko ezinesantya esiphantsi. Sicebisa ukuba isantya singadluli kwi-1000 rpm (6666PPS kwi-0.9 degrees), kungcono phakathi kwe-1000-3000PPS (0.9 degrees), kwaye inokudityaniswa nebhokisi yegiya ukuze yehlise isantya sayo. Imoto isebenza kakuhle kwaye inomsindo ophantsi kwisantya esifanelekileyo.
Ngenxa yezizathu zembali, yimoto ene-voltage ye-12V kuphela esebenzisa i-12V. Eminye i-voltage elinganisiweyo kumzobo woyilo ayisiyoyona voltage ifanelekileyo yokuqhuba yemoto. Abathengi kufuneka bakhethe i-voltage yokuqhuba efanelekileyo kunye nomqhubi ofanelekileyo ngokweemfuno zabo.
Xa imoto isetyenziswa ngesantya esiphezulu okanye umthwalo omkhulu, ayiqali ngqo ngesantya sokusebenza. Sicebisa ukuba inyuse kancinci isantya kunye nesantya. Ngezizathu ezibini: Okokuqala, imoto ayilahli amanyathelo, kwaye okwesibini, inokunciphisa ingxolo kwaye iphucule ukuchaneka kokubeka.
Injini akufuneki isebenze kwindawo yokungcangcazela (ngaphantsi kwe-600 PPS). Ukuba kufuneka isetyenziswe ngesantya esicothayo, ingxaki yokungcangcazela ingancitshiswa ngokutshintsha i-voltage, umbane okanye ukongeza umswakama.
Xa injini isebenza ngaphantsi kwe-600PPS (ii-degrees ezingama-0.9), kufuneka iqhutywe ngumbane omncinci, i-inductance enkulu kunye ne-voltage ephantsi.
Kwimithwalo enexesha elikhulu lokungakhathali, kufuneka kukhethwe injini enkulu.
Xa kufuneka ukuchaneka okuphezulu, ingasombululwa ngokongeza i-gearbox, ukunyusa isantya semoto, okanye ukusebenzisa i-divisiond driving. Kwakhona i-motor enamanqanaba ama-5 (i-unipolar motor) ingasetyenziswa, kodwa ixabiso layo yonke inkqubo libiza kakhulu, ngoko ke ayisetyenziswa rhoqo.

Ubungakanani bemoto yeStepper:
Okwangoku sineemoto ze-hybrid stepper ze-20mm(NEMA8), 28mm(NEMA11), 35mm(NEMA14), 42mm(NEMA17), 57mm(NEMA23), 86mm(NEMA34). Sicebisa ukuba umisele ubungakanani bemoto kuqala, uze uqinisekise ezinye iiparameter, xa ukhetha i-hybrid stepper motor.

Inkonzo yokwenza ngokwezifiso

Sinikezela ngenkonzo yokwenza ngokwezifiso kwi-motor kuquka inombolo yentambo ye-lead (iintambo ezi-4/iintambo ezi-6/iintambo ezi-8), ukumelana ne-coil, ubude bentambo kunye nombala, sikwanazo neendidi ezahlukeneyo zokuphakama abathengi abanokukhetha kuzo.
Ishaft ephumayo eqhelekileyo yi-D shaft, ukuba abathengi bafuna i-lead screw shaft, sinikezela ngenkonzo yokwenza ngokwezifiso kwi-lead screws, kwaye ungalungisa uhlobo lwe-lead screw kunye nobude be-shaft.
Umfanekiso ongezantsi yimoto eqhelekileyo ye-hybrid stepper ene-screw ye-trapezoidal lead.

Uhlobo lwemoto ye-NEMA stepper

Ixesha leNkokheli kunye nolwazi lokuPakisha

Ukuba sineesampuli esitokhweni, singazithumela iisampulu kwiintsuku ezi-3.
Ukuba asinazo iisampulu esitokhweni, kufuneka sizivelise, ixesha lokuvelisa limalunga neentsuku ezingama-20 zekhalenda.
Kwimveliso yobuninzi, ixesha lokunika i-oda lixhomekeke kubungakanani be-odolo.

Indlela yokuhlawula kunye nemigaqo yokuhlawula

Kwiisampuli, ngokubanzi siyayamkela iPaypal okanye i-alibaba.
Kwimveliso enkulu, siyayamkela intlawulo ye-T/T.

Kwiisampuli, siqokelela intlawulo epheleleyo ngaphambi kokuba sivelise.
Kwimveliso enkulu, singamkela i-50% yentlawulo yangaphambi kokuba sivelise, size siqokelele i-50% yentlawulo eseleyo ngaphambi kokuba sithunyelwe.
Emva kokuba sisebenzisane uku-odola izihlandlo ezingaphezu kwezi-6, singathetha-thethana ngeminye imiqathango yokuhlawula efana ne-A/S (emva kokubona)

Ngaphambili: I-M3 screw shaft 2 phase 10mm mini gear type stepper motor

Okulandelayo: Imoto ephezulu ye-Torque Micro 35mm stepper yeprinta