I-torque ephezulu ye-NEMA 23 hybrid stepper motor enobubanzi obuyi-57mm yemoto Umfanekiso obonisiweyo

I-torque ephezulu ye-NEMA 23 hybrid stepper motor enobubanzi be-57mm motor

Inkcazo emfutshane:

Inombolo yoMzekelo	57HS
Uhlobo lwemoto	imoto ye-hybrid stepper
I-engile yenyathelo	0.9° okanye 1.8°
Ubungakanani benjini	57mm (NEMA 23)
Inani lezigaba	Izigaba ezi-2 (i-bipolar)
Ikaliwe ngoku	1~4.2A/isigaba
Ubude benjini	41~112mm
Ubungakanani obuncinci be-odolo	Iyunithi e-1

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Inkcazo

Le yimoto ye-NEMA 23 57mm ububanzi exutyiweyo ye-stepper.
I-engile yenyathelo ine-degree eyi-1.8 kunye ne-degree eyi-0.9 ukuze abathengi bakhethe.
Ukuphakama kweenjini yi-41mm, 51mm, 56mm, 76mm, 100mm, 112mm,
Ubunzima kunye ne-torque yemoto inxulumene nokuphakama kwayo.
I-shaft esemgangathweni ye-output yemoto yi-D-shaft, enokutshintshwa nge-shaft ye-trapezoidal lead screw shaft.
Abathengi bakhetha ezi parameters zingezantsi ngokweemfuno zabo. Nceda uzive ukhululekile ukunxibelelana nathi xa unemibuzo malunga nemoto, kwaye siya kubonelela ngenkxaso yobungcali ngakumbi.

Iiparameters

I-Angle yeNyathelo (°)	Ubude benjini (mm)	Ukubamba i-torque (g*cm)	Okwangoku /isigaba (Isigaba/isigaba)	Ukuchasa (Ω/isigaba)	Ukungenisa (mH/isigaba)	Inani le ii-lead	I-inertia yokujikeleza (g*cm²)	Ubunzima (IKG)
0.9	41	3.9	1	5.7	0.7	6	120	0.45
1.8	41	3.9	2	1.4	1.4	8	150	0.47
0.9	51	7.2	2	1.6	2.2	6	280	0.59
1.8	51	3009	2	1.8	2.7	8	230	0.59
0.9	56	12	2.8	0.9	3.3	4	300	0.7
1.8	56	9	2	1.8	2.5	6	280	0.68
0.9	76	18	2.8	1.15	5.6	4	480	1
1.8	76	13.5	3	1	1.6	6	440	1.1
1.8	100	30	4.2	0.75	3	4	700	1.3
1.8	112	31	4.2	0.9	3.8	4	800	1.4

Iiparameters ezingentla ziimveliso ezisemgangathweni zereferensi, iimoto zinokwenziwa ngokwezifiso ngokusekwe kwiimfuno zomthengi.

Umzobo woyilo

Ulwakhiwo olusisiseko lweemoto ze-NEMA stepper

Ukusetyenziswa kwemoto yeHybrid stepper

Ngenxa yokuba iimoto ze-hybrid stepper zinamandla aphezulu (amanyathelo angama-200 okanye angama-400 ngokujikeleza ngakunye), zisetyenziswa kakhulu kwizicelo ezifuna ukuchaneka okuphezulu, ezinje:
Ukuprinta kwe-3D
Ulawulo lwemizi-mveliso (i-CNC, umatshini wokugaya ozenzekelayo, oomatshini belaphu)
Izixhobo zekhompyutha
Umatshini wokupakisha
Nezinye iinkqubo ezizenzekelayo ezifuna ulawulo oluchanekileyo.

IsiceloAmanqaku malunga neemoto ze-hybrid stepper

Abathengi kufuneka balandele umgaqo othi “khetha iimoto ze-stepper kuqala, uze ukhethe umqhubi ngokusekelwe kwimoto ye-stepper ekhoyo”
Kungcono ungasebenzisi imo yokuqhuba enenyathelo elipheleleyo ukuqhuba imotha yokunyathela exutyiweyo, kwaye ukungcangcazela kukhulu xa uqhuba ngenyathelo elipheleleyo.
Imoto ye-hybrid stepper ifanelekile ngakumbi kwiziganeko ezinesantya esiphantsi. Sicebisa ukuba isantya singadluli kwi-1000 rpm (6666PPS kwi-0.9 degrees), kungcono phakathi kwe-1000-3000PPS (0.9 degrees), kwaye inokudityaniswa nebhokisi yegiya ukuze yehlise isantya sayo. Imoto isebenza kakuhle kwaye inomsindo ophantsi kwisantya esifanelekileyo.
Ngenxa yezizathu zembali, yimoto ene-voltage ye-12V kuphela esebenzisa i-12V. Ezinye ii-voltage ezilinganisiweyo kumzobo woyilo azilona voltage ifanelekileyo yokuqhuba kwimoto. Abathengi kufuneka bakhethe i-voltage yokuqhuba efanelekileyo kunye nomqhubi ofanelekileyo ngokweemfuno zabo.
Xa imoto isetyenziswa ngesantya esiphezulu okanye umthwalo omkhulu, ayiqali ngqo ngesantya sokusebenza. Sicebisa ukuba inyuse kancinci isantya kunye nesantya. Ngezizathu ezibini: Okokuqala, imoto ayilahli amanyathelo, kwaye okwesibini, inokunciphisa ingxolo kwaye iphucule ukuchaneka kokubeka.
Injini akufuneki isebenze kwindawo yokungcangcazela (ngaphantsi kwe-600 PPS). Ukuba kufuneka isetyenziswe ngesantya esicothayo, ingxaki yokungcangcazela ingancitshiswa ngokutshintsha i-voltage, umbane okanye ukongeza umswakama.
Xa injini isebenza ngaphantsi kwe-600PPS (ii-degrees ezingama-0.9), kufuneka iqhutywe ngumbane omncinci, i-inductance enkulu kunye ne-voltage ephantsi.
Kwimithwalo enexesha elikhulu lokungakhathali, kufuneka kukhethwe injini enkulu.
Xa kufuneka ukuchaneka okuphezulu, ingasombululwa ngokongeza i-gearbox, ukunyusa isantya semoto, okanye ukusebenzisa i-divisiond driving. Kwakhona i-motor enamanqanaba ama-5 (i-unipolar motor) ingasetyenziswa, kodwa ixabiso layo yonke inkqubo libiza kakhulu, ngoko ke ayisetyenziswa rhoqo.
Ubungakanani bemoto yeStepper:
Okwangoku sineemoto ze-hybrid stepper ze-20mm(NEMA8), 28mm(NEMA11), 35mm(NEMA14), 42mm(NEMA17), 57mm(NEMA23), 86mm(NEMA34). Sicebisa ukuba umisele ubungakanani bemoto kuqala, uze uqinisekise ezinye iiparameter, xa ukhetha i-hybrid stepper motor.

Inkonzo yokwenza ngokwezifiso

Uyilo lweMoto lungahlengahlengiswa ngokusekelwe kwiimfuno zomthengi kuquka:
Ububanzi bemoto: sinemoto enobubanzi obuyi-6mm, 8mm, 10mm, 15mm kunye ne-20 mm
Ukumelana nekhoyili/ i-voltage elinganisiweyo: ukumelana nekhoyili kunokulungiswa, kwaye xa kuxhathiswa kakhulu, i-voltage elinganisiweyo yemoto iphezulu.
Uyilo lwezibiyeli/ ubude bezikrufu zentsimbi: ukuba umthengi ufuna isibiyeli sibe side/sifutshane, ngoyilo olukhethekileyo olufana nemingxunya yokufaka, sinokulungiseka.
I-PCB + iintambo + isixhumi: Uyilo lwe-PCB, ubude bentambo kunye nephiko lesixhumi zonke ziyalungiseka, zingatshintshwa zibe yi-FPC ukuba abathengi bafuna.

Ixesha lokukhokhela

Ukuba sineesampuli esitokhweni, singazithumela iisampulu kwiintsuku ezi-3.
Ukuba asinazo iisampulu esitokhweni, kufuneka sizivelise, ixesha lokuvelisa limalunga neentsuku ezingama-20 zekhalenda.
Kwimveliso yobuninzi, ixesha lokunika i-oda lixhomekeke kubungakanani be-odolo.

Indlela yokuhlawula kunye nemigaqo yokuhlawula

Kwiisampuli, ngokubanzi siyayamkela iPaypal okanye i-alibaba.
Kwimveliso enkulu, siyayamkela intlawulo ye-T/T.
Kwiisampuli, siqokelela intlawulo epheleleyo ngaphambi kokuba sivelise.
Kwimveliso enkulu, singamkela i-50% yentlawulo yangaphambi kokuba sivelise, size siqokelele i-50% yentlawulo eseleyo ngaphambi kokuba sithunyelwe.
Emva kokuba sisebenzisane uku-odola izihlandlo ezingaphezu kwezi-6, singathetha-thethana ngeminye imiqathango yokuhlawula efana ne-A/S (emva kokubona)

FAQ

1. Lingakanani ixesha lokuhanjiswa kweesampuli ngokubanzi? Lingakanani ixesha lokuhanjiswa kwee-odolo ezinkulu ezingasemva?
Ixesha lokunika i-oda yesampulu limalunga neentsuku ezili-15, ixesha lokunika i-oda yobuninzi limalunga neentsuku ezingama-25-30.

2. Ngaba uyazamkela iinkonzo ezenziwe ngokwezifiso?
Siyamkela iimveliso ezenziwe ngokwezifiso. kubandakanya ipharamitha yemoto, uhlobo lwentambo yelead, umngxuma ophumayo njl.njl.

3. Ngaba kunokwenzeka ukongeza i-encoder kule moto?
Kule moto yohlobo, singongeza i-encoder kwisigqubuthelo sokunxiba semoto.

Umbuzo Obuzwa Rhoqo

1.Izizathu kunye nezisombululo zomthwalo owandisiweyo kwiimoto ze-stepper emva kokusetyenziswa ixesha elide
Isizathu: Kwezinye iimeko, iimoto ze-stepper zinokusebenza ngokuqhelekileyo ixesha elide, kodwa emva kwexesha elithile ziya kulahlekelwa ngamanyathelo. Kwimeko enjalo, umthwalo kwimoto ye-stepper kusenokwenzeka ukuba utshintshile. Oku kunokubangelwa kukuguguleka kweebheringi zeemoto ze-stepper okanye yimpembelelo yangaphandle.
Isisombululo.
①Qinisekisa ukuba imeko-bume yangaphandle ayitshintshanga: Ngaba indlela esebenza ngayo imoto itshintshile?
②Qinisekisa ukuguguleka kweebheringi: Sebenzisa iibheringi zebhola endaweni yeebhushings ukuze wandise ubomi benjini.
③Qinisekisa ukuba ubushushu obungqongileyo abutshintshanga. Kwii-micro motors, isiphumo se-grease viscosity esithwalayo asingombandela ongaphantsi. Sebenzisa i-grease efanelekileyo kuluhlu lokusebenza. (umz. i-grease inokuba krakra xa kushushu kakhulu, okanye xa isetyenziswa ixesha elide ngaloo ndlela inyusa umthwalo we-motor)

2.Izizathu zokufudumeza iimoto zeStepper
①Iseti yamandla ombane ngumqhubi inkulu kuneyamandla ombane alinganisiweyo enjinini
②isantya semoto sikhawuleza kakhulu
③Imoto ngokwayo ine-inertia enkulu kunye ne-positioning torque, ngoko ke nokusebenza ngesantya esiphakathi kuya kuba shushu, kodwa akuchaphazeli ubomi bemoto. I-demagnetization point yemoto kwi-130-200 ℃, ngoko ke imoto kwi-70-90 ℃ yinto eqhelekileyo, logama nje ingaphantsi kwe-130 ℃ ngokubanzi ayiyongxaki, ukuba uziva ushushu kakhulu, i-drive current imiselwe malunga ne-70% yamandla emoto alinganisiweyo okanye isantya semoto ukunciphisa ezinye.

3.Xa i-stepper motor ivuliwe, i-motor shaft ayijikelezi, yenziwa njani?
Kukho izizathu ezahlukeneyo zokuba kutheni injini ingajikelezi.:
A. Ukujikeleza okuvalekileyo komthwalo
B. ingaba injini yonakele na
C. Nokuba injini ayisebenzi kwi-intanethi
D.nokuba ingaba isignali ye-pulse CP ukuya ku-zero