Ubude be-screw rod yi-76, ubude be-motor ngama-22, kwaye ukubetha malunga nobude be-screw rod - ubude benjini:
76-22=54mm
Xa i-screw rod inde, i-stroke inde. Okukhona i-screw rod imfutshane, kokukhona i-stroke iba mfutshane.
Lude kangakanani uhambo lwale moto? Ukuba senza isikrufu sokukhokela sibe side, ngaba uhambo luya kuba lude?
Umzobo we-10mm yemoto yokunyathela:
I-stroke yi-9mm
Ubume kunye nokwakhiwa kwe-10mm yemoto yokunyathela
Ukwakhiwa kolwakhiwo lwe-10mm emgceni yemoto yokunyathela (3D):
Ukwakhiwa kolwakhiwo lwe10mm umgca wokunyathela injini(Ukubola kwe-3D):
Ubume beRotor:
Esinye isiphelo se-rotor sijikelezileyo
Esinye isiphelo se-rotor yi-shaft ephindwe kabini
Ukutshatiswa kweeshafu eziphindwe kabini ze-rotor kunye ne-screw rod.
Ngaphakathi kwi nut:
Ngaphakathi kwi nut: Ngaphakathi kwi nut iqulethe imisonto ehambelana nemisonto ye screw rod.
Indongomane iguqula ukujikeleziswa kwesikrufu intonga ukuya phambili nangasemva intshukumo (intshukumo ejikelezayo → intshukumo yomgama)
Ubalo lweMotor stroke: (ukusuka ekuqaleni ukuya ekupheleni)
I-motor stroke yinkqubo yokususa i-screw rod ukusuka ku-A ukuya ku-B (9mm)
Ngoko ke, i-motor stroke ilula kakhulu:
Umgama we-screw rod ukusuka kwindawo A ukuya kwindawo B (inqunywe yisakhiwo se-motor, kungekhona ubude be-screw rod)
Ekubeni kungenamsebenzi ukwandisa i-screw rod, indlela yokuphucula ukuhamba kwale moto?
Impendulo: Phakamisa umgama phakathi kwe-shaft ephindwe kabini kunye ne-nut. Oko kukuthi, i-nut yokwandisa, njenge:
Emva koko injini iya kuba ngolu hlobo:
Ngale ndlela, i-nut kufuneka ihlaziywe kwakhona, kwaye i-screw ekhokelayo (ukwandisa) kufuneka ihlaziywe ngokutsha ukuze ikhulise. Iindleko ziphezulu kakhulu, ngoko oku akunjalo ngokubanzi.
Enye indlela yokucinga:
Yenza injini ibe nde.
Okwangoku, ubude be-10mm motor yi-10mm.
I-casing, iklasi ephakathi kunye ne-skeleton zonke zigqityiwe.
Ukuba i-motor yandiswa, oko kuthetha ukuba i-casing+intermediate class+skeleton+rotor iya kwandiswa kunye.
Iindleko ziphezulu kakhulu !!!
Ixesha lokuposa: Nov-25-2022